manualshive.com logo in svg

Bosch AMAX panel 2000 EN ICP-AMAX-P-EN, Руководство по установке, Страница: 71 / 92

Поделиться
Скачать
Bosch AMAX panel 2000 EN ICP-AMAX-P-EN Скачать руководство пользователя страница 71

AMAX panel 2000 / AMAX panel 2000 EN

 System Informations 2 | en

71

Bosch Sicherheitssysteme GmbH

Installation Manual

F.01U.241.127 | V4 | 2011.12

1.

Only after a Dynamic Battery Test report that the backup battery voltage is normal and 

fault is reset.

2.

When the output programmed duration is up.

If this duration is programmed as 000, the output will continue till the AC MAINS power is 

restored.

8 – RF Power Fault 

This output operates when RF power is lost. 

The output is reset:

1.

When the output programmed duration is up.

2.

lf this duration is programmed as 000, the output will continue till the RF power is 

Restored and the fault is reset.

If this duration is programmed as 000, the output will continue till the AC MAINS power is 

restored.

9 – Tamper 

This output operates when a Tamper condition occurs. 

The output is reset:

1.

When the output programmed duration is up.

lf this duration is programmed as 000, the output will continue till the Tamper condition is 

Restored and Tamper is reset.

10 – External Fault 

This output operates when an External Fault occurs. 

The output is reset:

1.

When the output programmed duration is up.

lf this duration is programmed as 000, the output will continue till the External Fault is 

Restored and the fault is reset.

11 – All Faults 

This output operates when a Fault occurs. 

The output is reset:

1.

When the output programmed duration is up.

lf this duration is programmed as 000, the output will continue till the Fault is Restored and 

the fault is reset.

12 – AWAY Armed 

This output operates when System is AWAY Armed. 

The output is reset:

1.

When the output programmed duration is up.

lf this duration is programmed as 000, the output will continue till the System is Disarmed.

13 – STAY Armed 

This output operates when System is STAY Armed. 

The output is reset:

1.

When the output programmed duration is up.

lf this duration is programmed as 000, the output will continue till the System is Disarmed.

14 – 24h Alarm

This output operates when a 24h alarm occurs. 

The output is reset:

1.

When the system is reseted

When the output programmed duration is up

Содержание AMAX panel 2000 EN ICP-AMAX-P-EN





























































































Отзывы:

Нет отзывов