Bosch AMAX panel 2000 EN ICP-AMAX-P-EN, Руководство по установке, Страница: 44 / 92

44 en | System Functions AMAX panel 2000 / AMAX panel 2000 EN
F.01U.241.127 | V4 | 2011.12 Installation Manual Bosch Sicherheitssysteme GmbH
To set the date and time for the 25th of December 2010 at 10:30PM, enter:
[1234] [955][#] break until time is shown [1 0 1 2 2 5 2 2 3 0][#]
6.16 Add/delete User Codes
This function allows Installer Code holder to change or delete a User Code.
1. Enter your Installer Code +956 and press [#] .
Two beeps sound and the STAY and AWAY indicators flash.
2. Enter the number of the code (1 - 8) you want to change and press [#] .
Two beeps sound and the corresponding zone indicator lights.
3. Enter the new code and press [#].
Two beeps sound and the STAY and AWAY indicators are extinguished.
4. Repeat this procedure to change other User Codes.
Example
To program User Code number 2 as 4627, enter:[1 2 3 4 ] [958] [#][2][#][4 6 2 7][#]
To delete a User Code:
1. Enter your Installer Code + 956 and press [#] . Two beeps sound and the STAY and AWAY
indicators flash.
2. Enter the number of the code (1 - 8) you want to change and press [#] . Two beeps sound
and the corresponding zone indicator lights.
3. Press [*] to delete the User Code. Two beeps sound and the STAY and AWAY indicators
are extinguished.
4. Repeat this procedure to delete other User Code.
6.17 Add/delete Radio User Codes
This function allows Installer Code holder to add or delete a Remote Radio User Code(if
enabeled in location 182)
To add or change a Remote Radio User Code:
1. Enter your Installer Code +956 and press [#] . Two beeps sound and the STAY and AWAY
indicators flash.
2. Enter the number of the code (9 - 16) you want to change and press [#] . Two beeps
sound and the corresponding zone indicator lights.
3. Press any of the (transmit) buttons on the hand held key-fob. Two beeps sound and the
STAY and AWAY indicators are extinguished.
4. Repeat this procedure to change other Remote Radio User Codes.
NOTICE!
This function is terminated automatically if you do not press a button within 240 sec or if you
press [#] . One long beep indicates that the code already exists or that an incorrect number
has been entered
NOTICE!
This function is terminated automatically if you do not press a button within 240 sec or if you
press [#] . One long beep indicates that the code already exists or that an incorrect number
has been entered
NOTICE!
This function is terminated automatically if you do not press a button within 240 sec or if
youpress [#] . One long beep indicates that the code already exists or that an incorrect
number has been entered.