manualshive.com logo in svg

Bosch AMAX panel 2000 EN ICP-AMAX-P-EN, Руководство по установке, Страница: 70 / 92

Поделиться
Скачать
Bosch AMAX panel 2000 EN ICP-AMAX-P-EN Скачать руководство пользователя страница 70

70

en | System Informations 2

AMAX panel 2000 / AMAX panel 2000 EN

F.01U.241.127 | V4 | 2011.12

Installation Manual

Bosch Sicherheitssysteme GmbH

The output is reset:

1.

When the system is disarmed

2.

When the output programmed duration is up.

If this duration is programmed as 000, the output will continue till the system disarmed.

3 – System Alarm

This output operates when an alarm occurs.

The output is reset:

1.

When the system is disarmed and alarm is reset.

2.

When the output programmed duration is up.

When a new alarm occurred, the alarm will reset the alarm time.

If this duration is programmed as 000, the output will continue till the zone restore or system 

disarmed.

4 – Entry/Exit Delay Warning

Entry Delay Warning

This output operates during Entry Time.

The output is reset:

1.

When the system disarmed

2.

When Entry Time expires

3.

When the output programmed duration is up.

Exit Delay Warning

This output operates during Exit Time when the control panel is armed.

The output is reset:

1.

When the system is disarmed

2.

When Exit Time expires

3.

When the output programmed duration is up.

If this duration is programmed as 000, the output will continue till the delay warning duration 

is up.

5 – Telephone Line Fail

This output operates when a telephone line fault occurs.

The output is reset:

1.

When the Telephone line is restored and fault is reset.

2.

When the output programmed duration is up.

If this duration is programmed as 000, the output will continue till the telephone line is 

restored.

6 – AC MAINS Fail

This output operates when a AC MAINS fault occurs.

The output is reset:

1.

When the AC power supply is restored

2.

When the output programmed duration is up.

If this duration is programmed as 000, the output will continue till the AC MAINS power is 

restored.

7 – Low Battery

This output operates when a Low Battery fault occurs.

The Dynamic Battery Test is performed every 4 hours after the system is powered up and 

every time the system is armed.

The output is reset:

Содержание AMAX panel 2000 EN ICP-AMAX-P-EN





























































































Отзывы:

Нет отзывов