Disposal 35/40
3 842 564 350/2020-06, MIT: PE 2/X, PE 2/H, PE 4,
Bosch Rexroth AG
12.1 Preparing the product for storage/later use
• Only set the product down on a fl at surface.
• Protect the product from mechanical stress.
• Protect the product from environmental infl uences, such as dirt and moisture.
• Pay attention to the ambient conditions, see page 37.
• For products with a mounted motor: Support the product so that the motor is not
placed under mechanical load.
13 Disposal
• The materials used are environmentally friendly.
• They can be recycled or reused (components may have to be processed and
replaced). Recyclability is ensured by the selection of materials and the ability to
take the components apart.
• Careless disposal may lead to environmental contamination.
•
Disposal of electrical components:
– Electrical components, tools, batteries, and packaging must be recycled in
accordance with environmental protection regulations.
– Never dispose of electrical components, tools, and accumulators/batteries in
household waste or commercial waste!
•
Only in EU countries:
– According to the currently valid EU Directive on Waste Electrical and Electronic
Equipment (WEEE) and its implementation into national law, electrical
components and devices that are no longer used must be collected, separated,
and recycled in accordance with environmental protection regulations.
– According to the currently valid WEEE EU Directive, exhausted or defective
accumulators/batteries must be recycled.
– According to the Directive, the product may
not contain any foreign substances or
foreign components when it is recycled.
• Dispose of the product in accordance with the regulations in your country.
14 Upgrading and modifi cation
• Do not modify the product.
• The Bosch Rexroth warranty only applies to the confi guration as delivered, and
to approved upgrades. The manufacturer will not accept any warranty claims for
systems with unapproved modifi cations or upgrades.
Please note:
EN
GLISH
