Bort 93410570, Руководство пользователя

Страница: 7 / 30

7
into the tank that may damage the instrument . It is
recommended to use distilled or filtered water .
• Protect the appliance from rain . Do not store outside .
•
QUICK REFERENCE
• Stainless steel pole consists of four sections . Draw second
section out, rotate along clockwise direction, and lock up .
Its height can be fixed according to specific needs (1)
• Unfold the hanger, install the hanger at the of the tel-
escopic pole (2)
• Insert the pole to the ironing support fixing bush (3) (for
C)
• Insert the telescopic pole to pole interface, locked by a
screw (4)
• Insert steam pipe into steaming pipe interface, rotate
along clockwise direction till it is tightly screwed (5)
• Loss up the top buckles of ironing support, then fixed it
at the bottom of the hanger, fix the down buckles to the
ironing support fixing bush, lock it (6)
• Take out water tank, open the lid, fill clean water into the
tank . Note: Only cold water can be filled . Do not use hot
water . To prolong garment steamers service life, purifier
water is preferred (7)
• Place water tank to its original position after the tank is
filled with water (8)
• Insert power line to the ac 220V240V socket (9)
• Press foot switch for turn on steamer (10)
Turn on rotary switch, garment steamer will begin start
work . (11) The switch have 4 level power, you can choose
the steam which you like .
1 . Disinfection;
2 . Chemical fiber polyester;
3 . Cotton linen or light clothes;
4 . Fur or heavy overcoat .
3
High temperature steam can soft clothes fiber, yet use
steam spurting out from the sprayer alone cannot iron
clothes thoroughly .
Thus, in order to iron clothes more efficiently, user shaft
adopt pulling strength and flat . Product demonstration
focus: Clutching clothes by hand and pulling it downward .
Note: clothes surface shall be as flat as possible .
MAINTENANCE AND CARE
Always disconnect the mains plug and allow the steam
cleaner to cool down before performing any maintenance
work .
TROUBLESHOOTING
Often, failures have simple causes and you can do the
troubleshooting yourself using the following overview . If
you are in doubt or if the failure is not listed here please
contact the authorized customer service .
Danger
Repair works may only be performed by the authorized
customer service . Always disconnect the mains plug and
allow the steam cleaner to cool down before performing
any maintenance work .
DECREASED STEAM AMOUNT
Appliance is decalcifi ed .
Decalcify appliance .
ENVIRONMENTAL PROTECTION
The packaging material can be recycled . Please do not
place the packaging into the ordinary refuse for disposal,
but arrange for the proper recycling .
Made in China .