bora PL540E, Инструкции по эксплуатации и монтажу

Страница: 28 / 36

EN
28
Cleaning and Maintenance
www.bora.com
8.2.2 Cleaning the cover flap, rotating
mechanism and stainless steel grease
filter
Q Q
The cover flap, rotating mechanism and stainless
steel grease filter can be cleaned manually or in a
dishwasher.
Manual cleaning
X X
Use a cleaner and degreaser in one.
X X
Rinse the cover flap, rotating mechanism and stainless
steel grease filter with hot water.
X X
Clean the cover flap, rotating mechanism and
stainless steel grease filter with a soft brush.
X X
Rinse the components well after cleaning.
Cleaning in the dishwasher
X X
Rinse the cover flap, rotating mechanism and stainless
steel grease filter with a rinsing program at maximum
55 °C.
Q Q
The stainless steel grease filter absorbs the greasy
particles from cooking vapours.
Q Q
If it is no longer possible to clean the stainless steel
grease filter completely, it must be replaced.
8.2.3 Installing the cover flap, rotating
mechanism and stainless steel grease
filter
Abb. 8.4 Inserting the stainless steel grease filter
X X
Insert the stainless steel grease filter into the opening
in the cooktop extractor.
X X
Ensure that the stainless steel grease filter is
positioned in the gap in the cooktop extractor
housing; it does not need to be locked into place.
Abb. 8.2 Removing the rotating mechanism
X X
Push the rotating mechanism to the middle of the
cooktop extractor.
X X
Turn the rotating mechanism 90° clockwise.
X X
Lift the rotating mechanism off upwards.
Abb. 8.3 Removing the stainless steel grease filter
X X
Reach into the opening in the cooktop extractor and
remove the stainless steel grease filter.