bora PKG3, Инструкции по эксплуатации и монтажу

Страница: 37 / 44

EN
37
Cleaning and maintenance
www.bora.com
X
Remove the burner cap [1] from the burner head [2].
X
Remove the burner head [2] from the gas outlet
X
Clean the parts of the burner.
X
Clean all of the flame outlet openings with a non-metallic
brush.
X
Wipe the fixed parts of the burner with a damp cloth.
X
Wipe the igniter electrode [3] and the thermocouple [4]
carefully with a well-wrung-out cloth.
O
The igniter electrode must not get wet, otherwise the ignition
spark will not light.
X
Finally, dry the pan supports carefully with a clean cloth.
O
Before reassembling the flame openings, burner heads and
burner caps must be completely dry.
X
Put the burner parts back together again.
X
Position the burner head [2] correctly on the gas outlet.
X
Ensure that the safety thermocouple [4] and the electric
igniter [3] are positioned in the correct opening.
X
Position the burner cap [1] so that it fits perfectly, sitting
straight on the burner head [2].
O
If burner parts are not positioned correctly, the electric igniter
will not work.
X
Place the pan support straight on the gas burner so it fits
perfectly.
X
Put the gas burner into operation (see the Operation chapter).
8.3 Looking after your cooktops
X
Never use a cooktop as a work or storage surface.
X
Do not push or pull cookware over the cooktop.
X
Always lift pots and pans.
X
Keep the cooktop clean.
X
Remove any dirt immediately.
X
Only use suitable cookware on the appliance (see the
Appliance description chapter).
8.4 Cleaning the control knobs
1 2
3
Fig. 8.3 Pull out the knob ring
[1] Knob housing
[2] Touch surface
[3] Knob ring
[1] Gas cooktop
[2] Pan support
[3] Gas burner
[4] Positioning aid
X
Remove the pan support [2].
O
Pan supports can only be cleaned by hand.
Manual cleaning
X
Use a cleaner and degreaser in one.
X
Rinse the pan supports with hot water.
X
Clean the pan supports with a soft brush.
X
Rinse the pan supports well after cleaning.
X
Dry the pan supports carefully with a clean cloth.
i
In the case of particularly stubborn or burned-on dirt,
the pan support can be briefly soaked in warm water
with washing-up liquid. Any limescale marks can be more
easily removed with diluted vinegar.
8.2.3 Cleaning the gas burner parts
i
The surface of the burner cap will become duller with the
passing of time. This is quite normal and does not mean
that the material is damaged.
1
2
3
4
5
6
Fig. 8.2 Gas burner structure
[1]
Burner cap
[2]
Burner head
[3] Electric igniter
[4] Safety thermocouple
[5] Burner housing
[6] Gas burner nozzle
O
Do not start cleaning until the gas burner has returned to
normal temperature after use.
O
The burner parts are not suitable for cleaning in the
dishwasher. Clean the burner parts by hand only.
O
Only clean with normal hot water to rinse and a conventional
washing-up liquid, using a soft sponge or a normal dishcloth.
O
Never scratch or scrape cooking residues off.
X
Remove the pan support.