bora PKG3, Инструкции по эксплуатации и монтажу

Страница: 22 / 44

EN
22
Installation
www.bora.com
Gas type/gas
pressure mbar
Ø SR burner/
normal burner
Ø R burner/
high-power
burner
G20/20 104 125
G25/20 110 131
G20/13 115 149
G25/25 G25.3/25 104 131
G20/25 100 119
G30/37
G31/37
69 85
G30/50 G30–50 mbar 62 78
Tab. 5.6 Nozzle table
Total nominal connection values for liquid gas:
Gas type mbar kW g/h m³/h
G30/G31 50 4.90 364 0.143
G30 29 5.00 364 0.143
Tab. 5.7 Liquid gas nominal connection values
Total nominal connection values for natural gas:
Gas type mbar kW m³/h
G20 20 5.00 0.48
G25 25 5.10 0.55
G25.3 25 5.10 0.54
G20 13 5.00 0.48
G25 20 4.80 0.55
Tab. 5.8 Natural gas nominal connection values
Special nozzle table for Australia and New Zealand:
AUS / NZS
gas type
Ø SR burner/
normal burner
Ø R
burner
NG/1.0 kPa (G20/10) 1.22 1.55
ULPG/2.75 kPa (G31/27,5) 0.75 0.92
Tab. 5.9 Nozzle table (Australia and New Zealand) Total nominal
connection values for U-LPG/
2.75 kPa test point pressure: 18.6 Mj/h
Cooktop energy consumption AU/NZ – U-LPG/
2.75 kPa test point pressure:
High Power front burner 11.2 Mj/h
Normal back burner 7.4 Mj/h
Total nominal connection values for NG/
1.0 kPa test point pressure: 19.5 Mj/h
Cooktop energy consumption AU/NZ – NG/
1.00 kPa test point pressure:
High power front burner 12.0 Mj/h
Normal back burner 7.5 Mj/h
1
2
3
4
5
6
Fig. 5.23 Gas burner structure
[1]
Burner cap
[2] Burner head
[3] Electric igniter
[4] Safety thermocouple
[5] Burner housing
[6] Gas burner nozzle
X
Remove the pan support.
X
Remove the burner cap [1] from the burner head [2].
X
Remove the burner head [2] from the gas outlet.
1
2
Fig. 5.24 Cooktop burner with gas burner nozzle
[1] Gas burner
[2] Gas burner nozzle
X
Unscrew the gas burner nozzle [2] from the gas burner [1]
X
Screw the corresponding nozzle for the gas type to be used
into the gas burner [2].
X
Put the burner parts back together again.
X
Position the burner head [2] correctly on the gas outlet.
X
Ensure that the safety thermocouple [4] and the electric
igniter [3] are positioned in the correct opening.
X
Position the burner cap [1] so that it fits perfectly, sitting
straight on the burner head [2].
O
If burner parts are not positioned correctly, the electric igniter
will not work.
X
Place the pan support straight on the gas burner so it fits
perfectly.