bora PKG3, Инструкции по эксплуатации и монтажу

Страница: 16 / 44

EN
16
Installation
www.bora.com
2
1
Fig. 5.6 Plinth area air supply
[1] Optional cable protection (shortened)
[2] Air supply via the plinth area (opening cross-section
≥150 cm²)
i
To ensure a sufficient air supply, an opening cross-
section of at least 50 cm² is recommended in the front of
the kitchen unit, or an opening cross-section of at least
150 cm² in the plinth area.
X
Make sure that the area below the cooktop has a sufficient air
supply.
5.4.5 Recirculation when using the cooktop
extractor as a recirculation system
In the case of recirculation systems there must be a return flow
aperture in the kitchen units:
O
>1000 cm² (per air cleaning box) in combination with gas
cooktop PKG3
i
If several extractor systems are operated in recirculation
mode, the return flow aperture for each air cleaning box
must be calculated accordingly. Example: 2 recirculation
systems = 2 x (>1000 cm²)
For recirculation, the necessary return flow aperture can be
created using a shortened plinth. A slatted plinth with at least
the minimum opening cross-section can also be used.
i
The hose connection must be laid in such a way that it is
not subject to deformation, buckling or abrasion.
i
The stopcock and gas supply pipe connections must be
accessible.
i
The pressure regulator must correspond to the set gas
type and set gas pressure and must meet local and legal
requirements.
i
The gas connection hose line must not come into contact
with smoke or the flue outlet of an oven.
i
The hose must not come into contact with hot surfaces
on the cooktop or other appliances.
Positioning of the gas cooktop PKG3 with two cooktop
extractors
If the gas cooktop is used in a model with two cooktop
extractors, it is to be installed at the side. If installed between
the cooktop extractors, the pull of air from both sides may affect
the flames.
  
Fig. 5.4
Position of the PKG3 with two cooktop extractors
Air supply for gas cooktop PKG3
1 2
Fig. 5.5
Air supply at front of the unit
[1] Air supply via the front of the unit (opening cross-section
≥50 cm²)
[2] Optional cable protection (shortened)