bora PKCH3, Инструкции по эксплуатации и монтажу

Страница: 28 / 36

EN
28
Cleaning and maintenance
www.bora.com
7 Cleaning and maintenance
If the cooktop is hot:
X
X
remove stubborn residues of plastic, aluminium foil, sugar or
sweet dishes from the hot cooking zone immediately using a
glass ceramic scraper to prevent burning.
Heavy soiling
X
X
Remove heavy soiling and marks (limescale marks, mother-
of-pearl-like shiny marks) using cleaning products while the
cooktop is still warm.
X
X
Wipe off any food that boils over with a damp cloth.
X
X
Remove any remaining dirt with the glass ceramic scraper.
X
X
Always remove any seeds, crumbs or similar that fall onto the
cooktop during cooking immediately to prevent the surface
getting scratched.
Any changes in colour or glossy spots do not mean that the
cooktop is damaged. They do not affect the functionality of the
cooktop or the stability of the glass ceramic panel.
Changes in the colour of the cooktop are the result of residues
which have not been removed and have burnt on.
Glossy spots are the result of wear by the pan base, especially
if aluminium-based cookware or unsuitable cleaning agents are
used. These are difficult to remove.
7.3 Looking after your cooktops
X
X
Never use a cooktop as a work or storage surface.
X
X
Do not push or pull cookware over the cooktop.
X
X
Always lift pots and pans.
X
X
Keep the cooktop clean.
X
X
Remove any dirt immediately.
X
X
Only use suitable cookware on the appliance (see the
Appliance description chapter).
X
X
Observe all safety and warning information (see the Safety
chapter).
X
X
Follow the enclosed manufacturer’s information.
X
X
When conducting scheduled cleaning and maintenance,
ensure that the cooktop and cooktop extractor are fully
switched off and cooled so as to prevent injury (see the
Operation chapter).
X O
Regular cleaning and maintenance ensures long service life of
the product and optimal function.
X
X
Adhere to the following cleaning and maintenance cycles:
Component Cleaning cycle
Control knob:
Knob ring/knob
housing
Immediately after every soiling
Cooktops:
Cooktop Clean well immediately after soiling, using
conventional detergents
Tab. 7.1 Cleaning cycles
7.1 Cleaning agents
i
Due to the use of aggressive cleaning agents and
abrasion caused by the pot bases the surface will
become damaged and dark stains will occur.
X
X
Never use steam cleaners, abrasive sponges, scouring pads
or chemically aggressive cleaning agents (e.g. oven cleaner
spray).
X
X
Make sure that the cleaning agent does not contain any sand,
soda, acids, lyes or chloride.
Cleaning products for glass ceramic cooktops
To clean the cooktop, you need a special glass ceramic scraper
and suitable cleaning agents.
7.2 Cleaning the cooktops
7.2.1 Cleaning glass ceramic cooktops
X
X
Make sure that the cooktop is switched off (see the Operation
chapter).
X
X
Wait until all cooking zones are cold.
X
X
Remove all coarse dirt and food residues from the cooktop
using a glass ceramic scraper.
X
X
Apply the cleaning agent to the cold cooktop.
X
X
Spread the cleaning agent using kitchen roll or a clean cloth.
X
X
Wipe the cooktop clean with a damp cloth.
X
X
Dry the cooktop with a clean cloth.