bora PKCH3, Инструкции по эксплуатации и монтажу

Страница: 17 / 36

EN
17
Installation
www.bora.com
5.6.2 Example bore holes
≥40 ≥70
90 90 90
Ø50 ±0,5
90 196 196
370 370 110
1 1
3
1 2
4 3 6 5
Fig. 5.11 Drilling pattern for 2 cooktops, 1 cooktop extractor
and 2 sockets
[1]
Boreholes for socket (x 2 external)
[2]
Bore holes for control knobs (x 5)
[3] Cooktop (x 2)
[4] Cooktop extractor
[5] Worktop
[6] Fixed front panel
≥70 ≥40
90 90 90 90 90 196 196 196 196
370 370 370 110
1 1 1 1
110
Ø50 ±0,5
3 3 1 2 4 4 3 6 5
Fig. 5.12 Drilling pattern for 3 cooktops, 2 cooktop extractors
and 2 sockets
[1] Boreholes for socket (x 2 external)
[2] Bore holes for control knobs (x 8)
[3] Cooktop (x 3)
[4] Cooktop extractor (x 2)
[5] Worktop
[6]
Fixed front panel
Cooktops/cooktop extractor B in mm
1/0 346
1/1 457
2/1 828
3/2 1310
4/2 1681
Tab. 5.3 Cut-out dimensions of the appliance combinations in
the case of surface mounting
5.6 Installing the control knob in the
floor unit front panel
Fig. 5.9 Installed control knob
X
X
Pre-drill all bore holes to prevent tearing out the fixed front panel.
5.6.1 Cooktop bore holes
≥40 ≥70
Ø50 ±0,5
370
80-140
1 2 3
Fig. 5.10 Cooktop drilling pattern
[1] Cooktop
[2] Worktop
[3]
Fixed front panel