bora PKCH3, Инструкции по эксплуатации и монтажу

Страница: 19 / 36

EN
19
Installation
www.bora.com
5.7.2 Installation rotated by 180°
(alternative installation variation)
Special installation instructions for cooktops PKC3, PKCB3
and PKCH3 when installed rotated by 180°
1
3
2
Fig. 5.19 Minimum clearances for installation rotated by 180°
[1] Minimum clearance of 70 mm at the back from the worktop
cut-out to the rear edge of the worktop.
[2]
Minimum clearance of 300 mm from the left and right of the
worktop cut-out to the adjacent cabinet or wall.
[3] Minimum clearance of 600 mm between the worktop and the
wall unit.
Installation rotated by 180°
X
X
Rotate the cooktop 180°.
X
X
For the installation, proceed as described above.
X
X
Change the installation direction in the configuration menu
(see “Configuration menu”).
i
If installation is rotated by 180°, the ports for the control
knobs and the automatic extractor function are at the
rear.
i
Cables of sufficient length are provided.
Levelling the cooktop (if necessary)
1
2
Fig. 5.17 Cooktop and height adjustment plates
[1]
Cooktop
[2]
Height adjustment plates
X
X
If applicable, insert the height adjustment plates [1].
Securing the cooktop
1
3
2
Fig. 5.18
Mounting brackets
[1] Mounting bracket
[2] Washer
[3] Screw
X
X
Secure the appliance using the mounting brackets [1].
X
X
Tighten the mounting brackets with the screw [3] using the
washer [2] with max. 2 Nm.
X
X
Verify that the alignment is correct.