Bontrager NODE 1, Руководство пользователя

Страница: 46 / 51

Installation
This section explains how to attach the computer to the handlebar and attach
the sensors and magnets to their locations. There are no wires.
Tools Required
• Screwdriver, small slot type
• Screwdriver, small phillips type
• 2.5mm allen key (if installing a SpeedTrap or DuoTrap sensor)
To Attach the Computer to the Handlebar
Determine the diameter of your handlebar (25.4 mm, 26.0 mm, or 31.8 mm).
Insert the correct clasp into the computer base (Figure 22).
Slide the head of the clasp to the end of the slot in the base.
Insert the rubber pad with logo into the back of the base (Figure 23).
Wrap the clasp around the handlebar.
From the front side of the computer, insert the screw and tighten (Figure 24).
Slide the computer head into the base (Figure 25).
1.
2.
3.
4.
5.
6.
7.
Figure 22. Clasp in the Back of Computer Base.
Figure 24. Tighten Screw.
Figure 23. Pad Inserted in Computer Base.
Figure 25. Slide Computer into Base.