Bontrager NODE 1, Руководство пользователя

Страница: 47 / 51

To Attach the Computer to the Stem
Insert the rubber pad with logo into the back of the computer base.
Position the base on the stem.
Secure the base to stem using zip-ties.
Slide the computer head into the base (Figure 25).
1.
2.
3.
4.
To Install the Speed Magnet
With the logo facing away from the wheel (Figure 26), wrap the magnet
around a spoke.
Close the magnet so that the spoke is in the tunnel through the magnet
(Figure 27). Squeeze the magnet until the clasp is engaged.
Slide the magnet up or down the spoke to align it with the sensor (Figure 28).
Tighten the clamp screw on the back of the magnet (Figure 29) to secure
the position of the magnet.
1.
2.
3.
4.
Figure 26. Magnet on Spoke.
Figure 28. Alignment of Magnet.
Figure 27. Spoke Slot and Clasp.
Figure 29. Tighten the Clamp Screw.