Bontrager NODE 1, Руководство пользователя

Страница: 12 / 51

When you switch the NODE to On the fi rst time (or replace the batteries or
perform the Reset procedure), the computer will automatically go through the
Pairing and Connecting procedures and set the units for one bike.
Before starting this procedure, place the NODE within 5 feet (1.5 m) of all
sensors, and be ready to activate the sensors as explained in Pairing.
To switch on the computer, hold for three seconds.
The NODE automatically goes to the Setting mode and bike1 and bike2
display with one highlighted. If it does not, push the Reset (erase settings)
button on the back of the computer.
To change
bike1
or
bike2
, press or .
To select, press .
You can go back from any selection: Press .
To change the wheel size, press or .
To select, press .
You can also set a Custom wheel size.
ODO
displays, then Ride Total displays (this may be zero) with the fi rst digit
underlined.
1.
2.
3.
Automatic Setup
NOTE
NOTE
4.
3.
1. 2.
To change the underlined digit, press or .
To select, press .
4.
(3 sec)
(or)
(or)
(or)