5
1. POWER SUPPLY: USB-DC CABLE
The instrument can be powered
by a
power bank
,
PC
,
phone
charger
, etc. with the USB-DC
cable supplied.
Insert the jack in the DC socket
j
.
2.
MAINS SUPPLY
- The
instrument can be powered
by a
mains adaptor 100-
240Vac
(not included) with
the following characteristics
in output: VDC = 5V; I = 500
mA
(positive central terminal).
Insert the
jack in the DC socket
j
.
WARNING: The transformer, power supply used with the electric toy shall be regularly
examined for damage to the supply cord, plug, enclosure or other parts, and in the
event of damage, it shall not be used until the damage has been repaired.
• the transformer or power supply is not a toy.
• Make sure the toy is disconnected from the power supply unit before cleaning it.
• the toy shall only be used with a transformer for toys or a power supply for toys.
This toy is only to be connected to equipment bearing either of
the following symbols.
NOTE: Rating plate information was located at bottom enclosure of the apparatus.
3. BATTERY SUPPLY
Use a screwdriver to open
the battery compartment.
Insert 4 x 1.5 V batteries R6/
AA
(not supplied), ensuring
correct polarity
(+/–)
. Re-fit
battery cover. Replace bat-
teries when the quality of sound becomes bad.
Use
alkaline batteries to obtain a longer duration
.
ATTENTION – BATTERY CARE
Non-rechargeable batteries are not to be recharged. •
Rechargeable batteries must be removed from the toy
before being charged. • Rechargeable batteries are only to
be charged under adult supervision. • Different types of
batteries or new and old batteries are not to be mixed. • Use
only batteries of the same or equivalent type. • Batteries are
to be inserted with correct polarity. • Remove exhausted
batteries to prevent leakage. • Do not short-circuit supply
terminals. • Remove batteries during long periods of non-
use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items
mentioned here below, please refer to Council Administration
office regarding specialised waste collection centres.
1. DISPOSAL OF BATTERIES:
Protect the environment by disposing of batteries in the special
containers provided for this use.
2. PACKAGING DISPOSAL:
Take the paper, cardboard and corrugated
board to the appropriate waste collection centres. Plastic
material must be placed in the relevant collection containers.
E N G L I S H
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET
= Polyethylene terephtalate •
PE
= Polyethylene, code
02 for PE-HD, 04 for PE-LD •
PVC
=Polyvinyl chloride •
PP
=
Polypropylene •
PS
= Polystyrene, Polystyrene foam •
O
=
Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES:
The wheelie bin symbol with a cross indicates
that the product must not be disposed of in the
domestic waste at the end of its useful life.
Instead, it should be taken to your nearest
designated collection point or recycling facility.
Alternatively, check with your retailer and return
the product when buying a replacement, on a one-to-one
basis or as free of charge in case the size is smaller than 25
cm. Appropriate disposal promotes the recycling of parts
and materials, as well as helping to protect the environment
and human health. Under current legislation, strict penalties
are enforced against those disposing of products illegally.
For more information about the collection of special waste,
contact your Local Authority.
SWITCHING ON/OFF
To switch on the instrument move selector
a
to ON. To
switch the instrument off, move the same selector to OFF.
DEMOSONGS
This keyboard has
8
demosongs. To choose the pre-
recorded tracks, press the
DEMO ONE
key
c
in succes-
sion. Press
DEMO ALL
key
b
, to listen to the demo-
songs in sequence. Press
STOP
n
to interrupt.
VOLUME CONTROL
Adjust volume to desired level by using the
VOL +
button
to increase or
VOL –
to reduce
f
.
SOUNDS
You can select one of the 8 sounds by pressing the rela-
ted button
r
.
RHYTHMS
You can select one of the
4
rhythms by pressing the rela-
ted buttons
q
.
Press the TEMPO buttons
e
to reduce (TEMPO
+
) or
increase (TEMPO –) the speed. Press
STOP
n
to inter-
rupt.
OKON (One Key One Note)
The
O
ne
K
ey
O
ne
N
ote function allows easy playing of the
melody of one of the pre-recorded songs.
Press the
OKON
d
button, choose the desired song by
pressing the corresponding white or black key (the accom-
paniment starts up), to perform the melody press any of the
keys in succession.
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
01
PET
02
PE
03
PVC
05
PP
06
PS
07
O
