- 17 -
5.
Water control knob
The water control knob allows you to control the amount of water that flows through the hand
piece. If turned clockwise, the amount of water will decrease. If turned counter-clockwise,
the amount of water will increase. Please note that water is necessary to cool the tip and
prevent overheating so it is necessary to ensure that an adequate amount of water flows
through the hand piece while operating the device. The larger the water stream, the lower the
temperature, and vice versa.
WARNING
：
Do not turn the water knob counter-clockwise more than three full turns.
Doing so will damage the internal water line needle.
WARNING
：
If needed, gently adjust the water control knob to prevent any serious
damages to the water valve.
6.
Power control knob
The Power Control Knob allows you to control the power intensity. When turned clockwise,
the power intensity increases. When turned counter-clockwise, the power intensity decreases.
7.
Micro-Motor Socket
The micro-motor socket is where you connect the micro-motor to the main unit. It is located
on the back of the main unit at the bottom left.
8.
Footswitch Socket
The foot switch socket is where you connect the foot switch to the main unit. It is located
next to the water hose input on the back of the main unit.
9.
Water hose input connector
The water hose input connector is the contact point for the water tube and the main water
supply line. Use either a male or female quick connect to connect the water tube to the water
supply. The ART-SP2 comes with a male quick connect attached to the water tube.
10.
Power cord socket
The power cord socket is where you connect the power cord to the main unit.
11.
Forward / Reverse switch
The Forward/Reverse switch allows you to control the direction of the micro-motor. It is
located on the back of the main unit.
