- 14 -
5-I: Polishing Hand piece Assembly and Start Up. (Optional accessories)
To detach, pull the cable from the hand piece in a straight motion. Do not twist, turn, or yank the
hand piece from the cable.
Polishing Hand Piece Assembly and Start Up. (Optional accessories)
(Figure 2)
To assemble the polishing hand piece, connect the Prophy Angle, Straight Hand Piece, and
Micro-motor by following the steps below:
1.
Connect the straight hand piece and the micro-motor by pushing the straight hand piece over the
rod of the micro-motor. It should snap into place.
(Figure 3)
2. Attach the prophy angle to the straight hand piece by following the steps below:
A) Unlock the prophy angle from the straight hand piece by turning the locking ring clockwise.
This should open the lock. Note: When you first unpack the straight hand piece, there may
be a metal rod at the top that serves as a placeholder. Remove the rod after you open the
lock.
(Figure 4)
