- 16 -
Section VI: General Description and Information of Parts
1.
Main unit
5.
Water control knob
9.
Water hose input
2.
Hand piece
6.
Power control knob
10.
Power cord socket
3.
Power button
7.
Micro-motor socket
11.
Forward/Reverse switch
4.
Micro-motor (Mode) button
8.
Foot switch socket
Figure 7. ART-SP2 diagram
1.
Main Unit
The main unit generates power and produces a signal that is passed to the hand piece. The
hand piece is then powered up and vibrates the installed tip.
2.
Hand piece
The hand piece is the housing for the piezo tip. It consists of four piezoelectric plates that
vibrate. The plates are driven by the electrical signal from the Main unit. The ART-SP2 unit
is compatible with Bonart BS-type piezo tips and other brands of piezo tips with a comparable
thread. Do not use Bonart BS-type piezo tips with the ART-SP2
.
3.
Power button (ON/OFF)
The power button is used to turn the ART-SP2 main unit on and off. When the power is on,
the LED indicator should be lit. When turned off, the LED power indicator should not be lit.
Do not press the foot switch while turning on the ART-SP2.
4.
Micro-motor (Mode) button
The micro-motor (Mode) button is used to switch between polishing and scaling mode.
When pushed, the LED indicator should be lit, indicating that the system is operating in
polishing mode. Under polishing mode, the micro-motor is engaged. To return to scaling
mode, push the button again.
