2
9
-.symbol. .
:quick.cooking.using.the.fan.oven,.the.oven.tempera-
ture.is.controlled.using..the.thermostat.knob.
In..all.positions.except.zero.(0).the.red.warning.light.and.the.oven.
light.are.on.
NOTE:.The.yellow.warning.light.comes.on.according.to.thermostat.
variations..Before.putting.food.in.to.be.cooked,.the.oven.should.be.
pre-heated.for.at.least.10.minutes.
HOW TO USE THE ELECTRIC GRILL WITH ELECTRIC OVEN
For models with “ Electric Oven” only,controlled by two knobs
separately (selector-thermostat), grilling is permitted with the
door closed, without using the front side. Temperatures above
200°C. must not be used when grilling with the door closed.
For the user
GB
USE OF THE TOUCH TIMER 3 KEYS
The irst start up
The numbers and the
A
letter on the display are blinking when the
oven is switched on for the first time, or after a power cut:the ap-
pliance cannot be operated in this condition.To set the hour and/or
to enable the appliance to operate press the
M
key for at least 2
seconds: the
A
letter turns off and the numbers now are steady on
the display.The dot (3) starts blinking: press the
-
or
+
key to set
the hour.The hour is accepted by the programmer just few second
after having released the key.
N.B.
the appliance can be correctly used for cooking only when
you will see on the display the symbol (2).
The symbols on the display
Timer
The purpose of the timer is just of a sound signal, which can be
set for a maximum time of 23h 59min. Once elapsed the set time,
the (4) symbol turns off and a sound signal is heard; this sound set
off automatically in 7min, or you can stop it by pressing any key of
the programmer. To set the timer press the
M
key for 2 seconds, or
anyway just to see the (4) symbol blinking. Set the timer by using
the
+
or
-
keys. Release the
+
or
-
key when you have matched
your desired time.In a few seconds the current time appears on
the display together with the (4) symbol.
The countdown starts immediately from now on.
Semi-automatic cooking
Cooking time
Once having selected a cooking function and set the desired
temperature, press the
M
key for a 2 seconds time to access the
programming mode. The (4) symbol appears. Release and press
again the
M
key.
On the display, the
A
symbol starts blinking and the “dur” writing
appears on the display, then it changes to 0*00.
Set the cooking time with the
-
or
+
keys. (max available time: 10h).
The selected time is automatically processed by the programmer
in a few seconds, or you can also touch the
M
key many times
just to see again the current time.The
A
and (2) symbols will be
on the display.
Once the set cooking time is finished, a sound will be heard and
the oven automatically switches off. Please see the following
paragraphs about how to disable the sound alarm and restarting
the oven.
End of cooking
Once having selected a cooking function and set the
desired temperature, touch the
M
key to access the
programming mode for at least 2 seconds.The (4) symbol
switches on. Release and touch again the
M
key.
On the display the
A
symbol starts blinking and the writing
“dur” appears. Touch again the
M
key. On the display the
writing “End” appears. The last one changes few seconds after
with the symbol 0*00.
Set the end of cooking time with the keys
-
or
+
. (maximum
avail-able time: 10h 00m). The selected time is automatically
processed by the programmer in a few seconds, or you can
also touch the
M
key many time just to see again the current
time. The cooking immediately starts, while on the
programmer display the current time is shown again in a few
seconds.
The
A
and (2) symbols will be on the display.
Once the set end of cooking time is finished, a sound will be
heard and the oven automatically switches off. Please see the
following paragraphs about how to disable the sound alarm
and restarting the oven.
Automatic cooking
Set a cooking time following the instructions on the cooking
time
paragraph, then set the end of cooking time following the
instruc-tions on the previous paragraph.(maximum available
end of cooking time 24h).
The oven automatically switches on at a determined time
which is the difference between the end of cooking time and
the cooking time.
During the waiting time before cooking, which goes from the
oven start to the heating, on the display appears the A symbol
to show that an automatic program is on and the current time.
The oven on is marked by the (2) symbol.
Once the set end of cooking time is finished, a sound will be
heard and the oven automatically switches off. Please see the
following paragraphs about how to disable the sound alarm
and restarting the oven.
-
M
+
24
•
00
A
1
2
3
4
5
6
7
1
A*
Automatic programme is working.
(* in some models there is the writing " Auto instead of A)
2
The appliance is ready for manual use (not automatic).
3
•
When blinking, the programmer is in setting hour mode.
4
Timer set.
5
-
Decreasing numbers when setting the timer. Also for choose
your desired sound level (3 levels available)
6
M
"Mode" key to access the programming options of the pro-
gramme.
7
+
Increasing numbers when setting the timer.
Содержание BO 689 DA/N
