Bompani BO 689 DA/N, Руководство по эксплуатации

Страница: 31 / 76

3 1
For the user
.
Any previous programmes are cancelled and the AUTO symbol
flashes.
NOTE:.when.the.
AUTO
.symbol.is.flashing.the.oven.cannot.be.
used manually.
"+".AND."-".BUTTONS.
-.Pressing.the."+".or."-."buttons.makes.time.go.up.or.down.at.
vari
able.
speed according to how long the button is pressed for .
MANUAL.USE.
-.Press.the.
MANUAL
.button:.the.
AUTO
.symbol.goes.out.(if.flashing.or.
. permanently.on).the.
SAUCEPAN
.symbol.lights.up.and.the.oven.can
be.used.by.adjusting.the.thermostat.knob.and.the.selector.switch.
according.to.the.instructions.given.in.the.manual.
AUTOMATIC.OPERATION.WITH..END.OF.COOKING.AND.DURA-
TION.TIMERS.
-.Let’s.use.an.example:.it.is.9:25.am;.you.want.the.oven.to.switch.on.
at.11.am.and.switch.off.at.12.pm.(cooking.time.1.hour)..
-.Press.the.
COOKING.DURATION
.button.and.within.5.seconds.press."+".
button.until.it.shows.01.00,.adjust.using."-".button.if.necessary..The.
AUTO
.and.
PAN
.symbols.come.on.permanently..
-.Press.the.
END.OF.COOKING
.button.and.within.5.seconds.press."+".
button.until.it.shows.12.00..The.
PAN
.symbol.goes.out.but.the.
AUTO
.
symbol.remains.permanently.on..
-.Move.the.oven.thermostat.knob.to.the.desired.temperature,.and.the.
. selector.switch.to.the.required.cooking.method;..the.red.warning.light
comes.on.the.oven.light.comes.on.and.the.timer.is.ready.to.start:.at.
11am.the.oven.will.come.on.automatically.and.the.
PAN
.symbol.will.
light.up..
-.When.cooking.is.over.(12.am).the.
AUTO
.symbol.flashes,.the.
PAN
.
symbol.goes.out.and.a.buzzer.sounds;.to.turn.off.the.buzzer.press.
any.button..
-.Move.the.thermostat.and.selector.knob.to.the.OFF.position..
SEMI-AUTOMATIC. OPERATION. WITH. COOKING. DURATION.
SELECTION
-.Let’s.take.an.example:.it.is.11:35.am.and.you.want.the.oven.to.stay.
on.for.25.minutes.from.now.on..
-.Press.the.
COOKING.DURATION
.button.and.within.5.seconds.press.the.
. "+".button.until.it.shows.00.25,.adjusting.the.time.with.the."-".button
if.necessary..The.
AUTO
.and.
PAN
.symbols.light.up.permanently..
GB
-.Turn.the.oven.thermostat.knob.to.the.desired.temperature.and.the.
selector.switch.to.the.required.cooking.method;.the.red.warning.light.
comes.on,.the.oven.light.comes.on.and.the.oven.starts.to.operate..
-.After.25.minutes.the.oven.and.the.
PAN
.symbol.go.out..The.
AUTO
.
.
symbol.flashes.and.the.buzzer.tells.you.that.cooking.is.over:.to.turn
off.the.buzzer.press.any.button..
-.Then.move.the.oven.thermostat.knob.and.the.selector.switch.to.the.
OFF.position..
MINUTE.MINDER.
-.Press.the.
MINUTE.MINDER
.button.and.choose.the.desired.time.using.
the."+".or."-".button..
-.The.
BELL
.symbol.lights.up.when.the.minute.minder.is.in.use..
-.When..the.pre-set.time.is.over,.the.buzzer.sounds.and.the.
BELL
.
symbol.goes.out.
BUZZER.
-.The.buzzer.sounds.at.the.end.of.a.programme.and.lasts.for.a.maxi-
mum.of.7.minutes..
-..To.turn.it.off,.press.any.button.
-.Pressing.the."-".button.without.having.previously.selected.a.function.
the.frequency.of.the.signal.changes..A.selection.from.3.possibilities.
can.be.made..The.selected.signal.is.audible.as.long.as.the."-".button.
is.pressed.
STARTING.AND.CHECKING.A.PROGRAMME.
-.The.programme.starts.after.about.4.seconds.of.it.being.set..
-.The.set.programme.can.be.checked.at.any.point.by.pushing.the.
corresponding.buttons.
PROGRAMMING.ERRORS.
-.Example:.at.12:15.pm.a.COOKING.DURATION.time.of.30.minutes.
is.set.and.a.END.OF.COOKING.is.programmed.in.at.12:30.pm..
-.The.programme.error.can.be.rectified.by.changing.the.duration.or.
the.end.of.cooking.time,.or.by.pressing.the.MANUAL.button.and.
programming.again.
-.If.there.is.a.programming.error.the.oven.will.not.come.on..
ANNULLING.A.PROGRAMME.
-.A.programme.can.be.cancelled.by.pressing.the.COOKING.DURA-
TION.button.and.then.the."-".button.until.the.display.shows.0.00.
IMPORTANT:AT THE END OF EVERY PROGRAMMED COOKING
OPERATION YOU ARE ADVISED TO PRESS THE BUTTON,
OTHERWISE THE OVEN CANNOT BE OPERATED MANUALLY.
USING THE ELECTRONIC TIMER WITH PUSH KNOB
GENERAL OPERATION
This timer governs the time display (with analog hands) and the
operation of the oven (using push knob and indicator icons).
Pushing on the the knob, you can: adjust the time, program the
start time and end of cooking, set the alarm (Minute Minder).
SETTING TIME
To adjust the clock press the knob briefly 4 times until you get
the flashing of the “CLOCK” icon. Hence to increase or
decrease the time, turn knob clockwise or counter-clockwise.
After 10 seconds of the last adjustment the electronic timer
automatically exit time setting mode.
MANUAL COOKING
During default condition, timer allows manual firing of the oven
using the general oven switch (external to the timer).
PROGRAMMING END COOKING TIME
Cooking end programming allows you to start immediately and
stop cooking in an automatic manner based on the time
scheduled. To program the end of cooking time briefly press 2
times the knob until you get the flashing of “END TIME” icon. To
increase or decrease the cooking time, turn knob clockwise or
counterclockwise. The flashing of “END TIME” icon continues
for some seconds after the last rotation. The program can be
confirmed by pressing the knob (at least 2 minutes of cooking
time). Upon confirmation of the program, the cooking is started
and the alarm is automatically activated. Cooking stops when
“Programmed End Time = Present Time”. To view the program
press and release the knob and the timer show the selected
program. When cooking stops the “END TIME” icon flashes and
the alarm beeps. After 1 minute beeps are disabled and the icon
“END TIME” remains flashing until you press the knob. To
cancel the program before the end, press the knob for some
seconds and the program will be canceled and the timer returns
to manual cooking mode.
USE OF SINGLE-CONTROL END OF COOKING TIMER
(WITHOUT CLOCK) (FIG.
2 2
)
This allows the cooking time to be programmed. Operation: -
Move the knob to the desired cooking time (120 mins max.). -
Choose the temperature using the thermostat knob and move
the selector knob to the required cooking method.
- When the programming knob is at the 0 position the oven will
switch itself off. This is automatic.
- Move the thermostat knob back to symbol .
- Move the selector knob to symbol 0..
N.B. If the timer is not used, the oven programming knob is to
be set to the manual position .