manualshive.com logo in svg

Bomar Workline 510.350 DG, Руководство по эксплуатации, Страница: 41 / 105

Поделиться
Скачать
Bomar Workline 510.350 DG Скачать руководство пользователя страница 41

 

 

41 

Údržba stroj

e

 

Wartu

ng 

Machine service

 

4.1.

 

Saw band dismantling 

During the dismantling, take care that you do not damage the limit switch if the saw 
band stretching. 

1.

 

Lift the saw frame to the top position. Stop the saw frame in top position by 
control valve. 

 

2.

 

Dismantle yellow protective cover of the saw band. The cover is clamped with two 
screws.  

 

3.

 

Open the cover of the arm. 

4.

 

Turn by stretching star to the left side, release saw band stretching and pull saw 
band from blade wheels. 

 

5.

 

Pull up the saw band from the guiding cubes 

4.2.

 

Saw band instalation  

During the installation, take care that you do not damage the limit switch if the saw 
band stretching! 

1.

 

Prior to installation, clean all track wheels, guide cubes and inner side of the arm 
thoroughly of all traces of chips and dirt. 

Keep in mind the teeth direction when 

installing the saw band.

 

 

Содержание Workline 510.350 DG










































































































Отзывы:

Нет отзывов