Bolton Tools BT1337G, Руководство оператора

Страница: 8 / 49

4.3 DESCRIPTION
SIGN NAME SIGE NAME
M Motor SB2 Jog switch
TC Transformer SA3 Pulley cover limiting switch
HL Indicator light SA4 Chuck cover limiting switch
HL1 Work light SA5 Brake switch
SB1 Stop switch K4 Heat relay
5. INSTALLATION?
CAUTION: THE MACHINE MUST BE SECURED, FIRM AND STABLE. DON’T
TURN DOWN OR MAKE ANY SUDDEN MOVEMENT WITHOUT INSPECTION
BECAUSE OF SHAKING, WIND POWER, LASHING OR OTHER EXPECTED
OUTER POWER OR INTERNAL MOVEMENT FORCE (SUCH AS FORCE, MOTOR
POWER FORCE, ETC.)
5.1
FOUNDATION
The base of the machines foundation must be solid and heavy enough to support the
weight, without noticeable defects. The floor must be fairly leveled. Concrete floor is
the best foundation. It provides a rigid base and minimizes vibration from adjacent
machines. The floor strength must be tested. The testing method: place a level on the
floor and put the machine on installation position, if the bubble shows appreciable
deflection, the floor must be reinforced.
When determining the position of installation, leave a space on the left, right, front
and back of the machine in accordance with its overall dimension and installation
dimension of the machine so that the operating and repairing is convenient.
If you use our stand (optional accessory), please, make a mark and drill eight holes in
the eight fitting hole position of the base according to the fitting dimension of the
stand. Cover eight foundation bolts in the base (note position precision when
determine the fitting hole position). Put the stand on the base, connecting to the eight
foundation bolts, then place two adjustable iron spacers in each, down face of front,
back of two stands (in order to increase the touched space, please stagger the position
of front and back adjustable iron spacer). Fix the connecting block of left, right of
stand, fit the stand on the base. At last, lift the lathe on the stand and connect and fix
the lathe to the stand by using nuts and bolts.
When fitting the lathe directly on the base, firstly, in accordance with fitting
dimension, mark and drill holes in the base of the six fitting hole position of the lathe.
Cover six foundation bolts in the base. Place two adjustable iron spacers on the base
in the front and back of the spindle box position and place one adjustable iron spacer
on the base in the cross direction of the tailstock position, then lift the lathe on the
adjustable iron spacers.