Bolton Tools BT1337G, Руководство оператора

Страница: 14 / 49

CAUTION: DON’T CHANGE SPEED WHEN THE SPINDLE IS RUNNING.
8.4 MAIN SPINDLE ROTATION
Starting, stopping, forward and reverse of spindle can be made merely by the control lever.
When using the control rod, pull the lever in the headstock direction, then pull up and down.
Control lever on the top position Control lever in the middle position Control lever in the bottom position
Moving the control lever down the spindle will be forward rotation. Control lever up and the
spindle will be in reverse rotation. Control lever in the middle will make it stop. If the motor
is one phase and you need to change the direction of the spindle, please move the control
lever from one side to the middle, till the motor stops. Then move up or down. If you move
the control lever from one side directly to another side, the direction of the spindle won’t
change.
8.5 GEAR BOX
Quick-change gear system, designs the rate of the spindle to lead screw and feed rod when it
is used to cut thread or external turning and facing. Quick –change gear box is controlled by
two handles.
Handle (1) exits A, B, C, three positions. Handle (2) has 1, 2, 3, three
positions.
Handle (3) has three positions which is left middle and right. Handle to the left is
used for external turning, internal turning and facing. The handle to the middle is
parking. Handle to the right engages leadscrew for cutting thread. This machine can
be used to use to cut metric and standard threads, when handles (1) and (2) are
positioned in the corresponding position. Please change gears A, B, C, or D. when
necessary.
1) Gear changing handle
2) Gear changing handle A) Gear B) Gear
3) Feed rod and leadscrew changing handle C) Gear D) Gear