Bolton Tools BT1337G, Руководство оператора

Страница: 9 / 49

Fitting dimension without stand
5.2 LIFTING
Lifting the lathe as the following figure shows.
Put the mats in which the lifting tools connect before lifting the lathe, to avoid
damaging the machine’s surface.
The lathe net weight 330kg (728lbs), stand weight 60kg (132lbs). You must keep the
machine in balance to avoid tilting.
The carriage, tailstock and other sliding parts of the lathe are locked before leaving
factory. Don’t loosen these when lifting and should inspect to confirm whether they
are locked or not in order to prevent the parts from sliding. Carefully install the
machine on the base or stand with bolts and nuts.
5.3 CLEANING
Prior to shipment, all machines and their finished surfaces are coated with antirust oil
to protect and prevent rusting. Before moving the carriage or tailstock, use multi-
purpose cleanser to remove the rust preventive coating. Use a brush and the cleanser
to clean the ways of any residue or rust preventive coating. Such care in the cleaning
will ensure the removal of any foreign particles and prevent the way from rusting or
damaging. Lubricate the ways after you are done cleaning.