bolid ShPS-12, Руководство пользователя

Страница: 9 / 29

10
i) To request the status of the ShPS-12 using the S2000M panel (see S2000M User’s Guide):
CODE:_
Enter a passcode
v
5 VIEW INPUT STATUS
Select the View Input Status using the
43
buttons and press , or press
5
for quick navigation
v
51 INPUT STATUS
Select the Input Status item using the
43
buttons and press or press 1
for quick navigation
ADDRESS:_
Enter the device address (1 to 127) or select it from the menu using the
43
buttons, and then press
INPUT #:_
Enter the required input number (see below) or select it using the
4 3
but-
tons, and then press
For the ShPS-12, status of the following can be requested on the relevant inputs:
Input #0: Tamper switch Input #1: Output Voltage
Input #2: Output current
Input #4: Battery 2 voltage Input #3: Battery 1 voltage
Input #5: Charger
Input #6: Mains voltage
j) To view the resulted voltage and current measurements (see S2000M Users’ Guide):
CODE:_
Enter a passcode
v
5 VIEW INPUT STATUS
Select the View Input Status using the
43
buttons and press , or press 5
for quick navigation
v
52 INPUT ADC
Select the Input ADC item using the
43
buttons and click , or click
2
for
quick navigation
ADDRESS:_
Enter the device address (1 to 127) or select it from the menu using the
43
buttons and press
INPUT #:_
Enter the required input number or select it from the menu using the
4
3
buttons and press
The requested data are presented in the form of text and specific ADC values:
Input
Information on the S2000M display
Use the
⊳
buttons to browse measurements
# 0
−
ТЕМПЕРАТУРА +25° С
−
Трезерв = 03 ч 50 мин
(Depends on the battery capacity, output current, and battery temperature)
or
Изм
.
ждите
… (The MIP-12 is calculating the value, please wait for about a minute)
or
АКБ ОТКЛЮЧЕН (No batteries are connected to the MIP)
−
Ттеста = 03 ч 00 мин (Depends on the battery capacity, output current, and battery temperature)
or
Заряд АКБ <80% (Battery charge is less than 80%; no capacity can be measured)
or
Изм . ждите … (The MIP-12 is calculating the value, please wait for about a minute)
or
АКБ ОТКЛЮЧЕН (No batteries are connected to the MIP)
−
Ёмкость 17,00 Ач (The last measured capacity)
or
Ёмкость не изм . (No battery capacity was measured)
or
АКБ ОТКЛЮЧЕН (No batteries are connected to the MIP)
−
Тнар _ ост = 43800 ч (5 years)
# 1
−
Uout = 9,5…14,2V
# 2
−
Iout = 0,1…4 A