19
STORAGE
1. To store the 2 in 1 Rower / Recumbent Bike simply keep it in a clean dry place.
2. To avoid damage to the electronics meter, remove the batteries before storing the 2 in 1 Rower /
Recumbent Bike for one year or more.
3. Move the 2 in 1 Rower / Recumbent Bike with the moving wheels on the Front Stand. Grasp the Rail Cap
to move the 2 in 1 Rower / Recumbent Bike. Do not use the Seat to move the 2 in 1 Rower / Recumbent
Bike. The Seat will move and the Seat Carriage may pinch your hand or fingers.
4. Follow the following process to fold the 2 in 1 Rower / Recumbent Bike as illustrated for easy storage.
a. Adjust and lock the seat in position with at least one adjustment hole visible in front of the seat.
NOTE:
This will prevent the seat from damaging the covers.
b. Remove the PULL PIN(63) and swing the REAR SUPPORT(62) toward the front.
NOTE:
This will allow you to pull out the RELEASE KNOB(59) easily.
c. Pull out the RELEASE KNOB(59) and fold up the RAIL(52). Make sure the RAIL(52) is locked securely
in folded position by RELEASE KNOB(59).
d. Lock the REAR SUPPORT(62) in folded position with the PULL PIN(63).
UNFOLD THE 2 IN 1 ROWER / RECUMBENT BIKE
a. Pull out the RELEASE KNOB(59) and unfold the RAIL(52). Make sure the RAIL(52) is locked
securely in the unfolded position by RELEASE KNOB(59).
b. Remove the PULL PIN(63) and swing the REAR SUPPORT(62) backward, then lock the REAR
SUPPORT(62) in position with the PULL PIN(63).
