Bodyworx JX300, Руководство пользователя

Страница: 13 / 22

12
P1 M a n u t i m e ： Pre-set value 0min ； Range 20~99min ， step 1 min 。
P2 9 h o l e L E V E L
：
Initial Value 1
，
Range1~10
，
step1
，
3500 meter is based on distance.
P3 hill c limb LEVEL ： Initial Value 1 ， Range 1~10 ， step 1 。
i tm e
：
Pre-set value 30min
；
Range 20~99min
，
step 1 min
。
P4 hill ru n LEVEL ： Initial Value 1 ， Range 1~10 ， step 1 。
i tm e
：
Pre-set value 30min
，
Range 20~99min
，
step 1 min
。
P5 i n t e r v a l LE V E L
：
Initial Value 1
，
Range 1~10
，
step 1
。
time ： Pre-set value 30min ， Range 20~99min ， step 1 min 。
P6 rolling LEVEL
：
Initial Value 1
，
Range 1~10
，
step1
。
time ： Pre-set value 30min ， Range 20~99min ， step 1 min 。
P7 W eight loss LEVEL
：
Initial Value 1
，
Range 1~10
，
step 1
。
time ： Pre-set value 30min ， Range 20~99min ， step 1 min 。
P8 C u s t o m ti m e
：
Pre-set value 30min
，
Range 20~99min
，
step 1 min
。
PROGRAM has 30 levels in all (SE01~SE30) and all the pre-set values are lowest value.
Setting ： time ， program execute value(setting time can execute by 30 levels averagely ）
（ 1 ） After entering into the mode function, at this time, the LEVEL light is on, window flashes.
This function is to select acuteness level of movement ( L1~L10) . You can press or
to change the level you need and press ENTER to make sure.
（ 2 ） After finishing selecting level, then TIME w indow will start to flash. At this time press
or to set the sport time you need. Or press ST ART key directly to start with no count
down.
** range of time value
：
20~99 min
，
pre-set 30min
，
step 1 min.
**If the treadmill has HRC function
， ，
P8 Custom function will be replaced by
HRC function, the operation as following:
P8 H R C HRC function
：
(This function must be used with Chest Belt)
The purpose of this program is self-training based on heart rate. During the training, when
heart rate of runner achieves the setting number that you make, the speed and elevation will
keep within a certain range for best training effort.
After you have chosen this mode, the program will ask you to input values as following steps:
1. When the AGE LED indicator flashes
，
you can press or to adjust the age, after the
set, press to enter the next option.A ge pre-set value ： 30 ; Range of age ： 13~80 ， Step is
1.
2.At this time, the
PULSE LED indicator flashes
，
and the program will ask you to enter the
pulse value, this value will change according to different ages. Refer to the chart below the
manual for the values and select a suitable one, then press or to adjust the pulse value.
If you don’t make any changes, press and the program will change according to the
default values and enter into the next setting.
3. At this time the TIME window flashes ， program will ask you to input the time value ，
press or to set the desired exercise time or press directly to start the
exercise with no count down.
（
*Range of Time
：
20~99 min
，
default value 30min
，
step is 1
）
**This chart is about Age and Pulse Value (default value) for HRC Function.