Bodyworx JX300, Руководство пользователя

Страница: 12 / 22

11
III. III.
Edit Mode
： ：
1. Under Start/Ready position, press Mode to choose Manu and Program mode by press +/-
key.
2. Program Mode
：
Press +/- key to edit the Program (P1~P8), and the PROGRAM window
will flash, the LCD window will show P1~P8 to edit, you can press +/- key to edit. Press
ENTER to enter the TIME edit, the Program pre-set value is 30min, Range is 20~99min,
STEP is 1min.After edit, press ENTER or START to start the machine. If you press
START directly during edit, the rest un-edited functions are pre-set. During edit, INCLINE
and SPEED window will display first level value. The matrix window will display the
picture.
3. WARM UP and COOL DOWN function: During WARM UP or Program position, change
speed or inclination, the value will increase or decrease in the next level. COOL DOWN is
not affected and STOP is the only function which can be carried out.
4. PROGRAM has 30 levels in all. The three anterior are WARM UP, the three later are
COOL DOWN. Each is 3 minutes. The setting time except anterior and later which mean 6
minutes will be execute averagely by surplus 24 levels.
5. 9 HOLES mode has not functions of WARM UP or COOL DOWN. When distance is
equal to 3.5KM, the motor will stop, the INCLINE is 0 and displays” End”
IV. Program Operation and Instruction
： ：
Manu Mode
1. When press START, it will begin to count down for 3 seconds, after that, the motor will
start , the speed will start at 0.8KPH
（ 0.5MPH ） .The matrix window goes contrarotate like
along playground, every circle is 0.4KM (0.25MIL).
2. Speed STEP is 0.1, you can press SPEED UP/DOWN key to select
（
the speed UP/DOWN
step is 0.1
）
, or press speed instant key 1
、
2
、
4
、
6
、
8
、
10 to select.
3. Incline STEP is 1, you can press INCLINE UP/DOWN key to select （ incline UP/DOWN
step is 1
）
, or press incline instant key 2
、
4
、
6
、
8
、
10
、
12 to select.
4. When TIME can set or can’t set:
(1)When TIME can set ， the window will display the countdown value from target value.
When time reaches 0:00, the treadmill will stop automatically.
(2)When TIME can’t set
，
the window will display positive number. When time reaches
99:00 the treadmill will stop automatically.
5. Pressing Mode key can switch among SPEED, DISTANCE, CALORIES and can’t switch
among INCLINE, PULSE, WEIGHT. It will just display INCLINE. When there is PULSE
signal, it will display the PULSE value. When there is heartbeat value, the PULSE window
will display the heartbeat value.
6. Press Stop when the motor is working, the motor will stop and the incline motor will stop,
the Time window will display Stop; If you press START key again, the motor will start
after 3-seconds countdown, the speed will be kept at the same before stop , and the incline
will be increased to the set height before stop.
7. When it is at stop position, hold the Stop key for 3seconds, and it will go back to the
Start/Ready position.
8. It will go back to the Start/Ready position after 30 seconds in the End position (or press
Stop key).
9. The time pre-set value is 0, range is 20~99. When the time is 20 minutes, press +- to
increase or decrease. Increase Step is 1 and decrease is back to 0 directly. The matrix
window goes contrarotate like along playground during workout.
V. Program Mode