Bodyworx JX300, Руководство пользователя

Страница: 11 / 22

10
8. COMPUTER OPERATION INSTRUCTIONS 8. COMPUTER OPERATION INSTRUCTIONS
I. Start Display:
1. If the SAFETY KEY is taken off, the matrix window will display arrow adown. If the
SAFETY KEY is replaced
， the matrix window will display KGS (LBS) for avoirdupois
unit. Weight window glitters and displays the pre-set value. The value is 70KG(150LBS)
and range 23~180KG(50~400LBS). At this time the light of Weight window shows.
Finish setting or not setting, press ENTER and the window will turn to Start / Ready status.
The matrix window displays pulsatile heart-shaped picture. The aim of setting weight is to
make a change of burning CALORIES. This can be only done after starting. It does not
need to set in PROGRAM. It means you can use the value after starting. You must set
newly after starting again.
2. If the SAFETY KEY is removed during work out, the beeper will sound and then the
treadmill will stop running. At this time place the SAFETY KEY back and all the values
will go back to the initial position.
3. Under the common Start / Ready status, PULSE window will display HP picture if you
don’t grip the pulse sensor. If you grip the pulse sensor, you will see PULSE window
starting to display pulse value.
II. Operation Instruction
：
1.
：
Under Start/Ready position, you can press Mode directly to enter the program edit.
2. Under Start/Ready position, press Start to enter directly the start-up of Manu run.
** When the SAFETY KEY is taken off and then replaced, it will not make reposition action
any where it is. You need to press start key to perform the incline to reposite it.
** When power on, it will not make reposition action any where it is. You need to press start key
to perform the incline to reposite it.
** Under start/ready status, continuously press stop key for 5 seconds, it will make reposition
action any where it is.
** During perform any program, if press stop key, the program will stop. If users want to
continuously perform the program, press start key or again press stop key to leave the program
and back to start/ready status