12
9
STEP 3
⚫
Remove the Clamp (25) and Allen bolt (22) from Front post (4). Attach Handlebar (5) to
Front post (4) and tighten with Clamp (25), Allen bolt (22), Cover for clamp (37) and
T-type knob (21).
⚫
Insert Hand pulse wires (20) into the Grommet (32) and pull out from top bracket.
⚫
Attach Hand pulse wires (20) and Upper computer wire (33) to the Computer (6)
accordingly. Tighten with 4 Screws (27) which are pre-assembled on the back of the
Computer (6).
21
22
25
37
20
32
20
33
6
4
5
STEP 4
⚫
Attach the Cover (35) to Sliding tube (44) and tighten with the Screw (45) which is
pre-assembled on the Sliding tube (44).
⚫
Release the nuts under the Seat (8), attach the Seat (8) to Sliding tube (44) and tighten
the nuts.
⚫
Insert the Seat post (7) into the Main frame (1) through the Seat post cover (17). Line
up the holes and secure seat in position with Quick release knob (11). The correct
height for seat can be adjusted after the bike is fully assembled.
⚫
Attach the Bottle holder (19) to the Front post (4), securing with the 2 Screws (45) which
is pre-assembled on the Front post (4).
1
11 17
8
7
35
45
19
45
44
8
Nut
STEP 5
