BodyGuard
SAFETY SOLUTIONS
-Tag
®
Driver Awareness System
BodyGuard Safety Solutions—A division of Orbit Communications Pty Ltd Install Guide rev r1.11
Page
4
Fitting M12 circular male plugs to 4-core cable
1) Loosen Hexagonal plastic nut at bottom of plug by
rotating ant-clockwise.
2) With rear nut unfastened, hold knurled plastic ring near
metal ring with one hand and turn plastic body of plug anti-
clockwise with other hand.
IMPORTANT: Be careful to ensure correct wiring of plug. The signals are connected to pins as shown
below at BOTH ends of the cable (i.e. Straight-Through connection).
Wire colouring
Pin 1:
Red
Pin 2:
White
Pin 3:
Green
Pin 4: Black
RED/Black = shielded twisted pair
White/Green = shielded twisted pair
3) Use a screwdriver to fasten ends of cable to the
terminals inside the plug head
