background image

WARNING: SERIOUS INJURIES AND EVEN DEATH CAN OCCUR IF THE PROPER SAFETY PRECAUTIONS ARE NOT FOLLOWED. 

The diagram below highlights and reviews many of the important Safety and Warning labels also found

on the unit. Please ensure any user of the unit familiarizes themselves with these Safety and Warning

guidelines before use. 

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE USE & REFERENCE.

DO NOT DISCARD.

The use of this exercise equipment involves a 

RISK OF PHYSICAL INJURY

 as well as 

property damage, which can be minimized by observing the following guidelines: 

1. 

ALWAYS

 wear comfortable clothing 

and shoes with good traction. 

2. 

ALWAYS

 make sure all nuts and bolts 

are secured before use. TIGHTEN 

PEDAL HINGE BOLTS EVERY 30 

DAYS. 

3. 

STOP EXERCISING

 if you become 

dizzy, nauseous, have irregular 

heartbeats or breathing difficulties. 

Contact your physician immediately. 

4. 

ALWAYS

 keep a large mat under the 

Equipment to protect the floor or carpet. 

5. 

ALWAYS

 use your Equipment in a 

warm, dry, level well-lit and ventilated 

indoor area. 

7. 

ALWAYS

 keep your Equipment clean 

and free of dust, moisture, debris and 

loose objects. 

8. 

NEVER

 use the Equipment if you are 

injured or have a physical condition 

that impairs your balance. DO NOT 

exercise under the influence of 

medication or alcohol. 

9. 

NEVER

 allow small children or pets to 

approach the Equipment. It is not a 

toy. 

10. 

NEVER

 use the Equipment if you 

exceed its weight limit of 300 lbs. 

11. 

NEVER

 use the Equipment if it does 

not function properly. 

  6. 

 ALWAYS 

keep body and clothing free 

 and clear of all moving parts.

W A R N I N G !

!

              

Page 21

BRM8000/8800

Содержание BRM8000

























Отзывы: