Computer Operation
Page 1
BRM8000
1.ENTER:
●
When unit does not detect motion (STOP is displayed), press ENTER to enter into program selection and setting value which flash in related window.
A: After you select a program, press ENTER to confirm your selection.
B: When pre-setting values, press ENTER to confirm the value that you would like to preset.
●
When unit detects motion (START is displayed), press ENTER to choose display of functions: SPEED, RPM, or automatic rotating.
●
During any mode, hold down ENTER for 2 seconds to reset the computer.
2.START/STOP:
●
Press START/STOP to start or stop the workout programs.
●
During any mode, hold down START/STOP for 2 seconds to reset the computer
.
3.UP:
●
When unit is not in motion and dot matrix flashes, press UP to select the program up. If the related values flash, press UP to increase the value.
●
During the start mode (START is displayed), press UP to increase the training resistance.
4.DOWN:
●
When unit is not in motion and dot matrix flashes, press DOWN to select the program down. If the related values flash, press DOWN to decrease the value.
●
During the start mode (START is displayed), press DOWN to decrease the training resistance.
5.RECOVERY
3XOVH
●
First, test your current heart rate and when your heart rate value displays, press RECOVERY to set the value and enter into pulse recovery testing.
●
When you are in pulse recovery mode, press RECOVERY to exit the mode.
NOTE:
It is suggested your finger covers only the marked button region when pressing to avoid undesired button selection..
BUTTONS:
1.TURN ON THE COMPUTER
Plug in one end of the adaptor to the AC electrical source and connect the other end to the computer.
2.PROGRAM SELECTION & SETTING VALUES
●
Manual Program and Preset Program P1 ~ P10
A.Press UP/DOWN button to select the program of your choice. (See fig 25)
B.Press ENTER to confirm the selected program and enter into the time-setting window.
.
C.The time will flash; then, press UP/DOWN to set your desired time. Press ENTER to confirm the time value. (See fig 26)
DIST.
M
RPM
M/H
LEVEL
START STOP
PULSE
%
YEAR cm in Kg lb
TIME BMR
CAL BMI
WATT BODY
fig 24
DIST.
M
M/H
LEVEL
STOP
TIME
CAL
WATT
DIST.
M
M/H
LEVEL
STOP
TIME
CAL
WATT
DIST.
M
M/H
LEVEL
STOP
TIME
CAL
WATT
DIST.
M
M/H
LEVEL
STOP
TIME
CAL
WATT
DIST.
M
LEVEL
START
TIME
CAL
WATT
RPM
fig 25
OPERATION: (“HOW-TO”)
D.The distance will flash; then, press UP/DOWN to set the desired distance value. Press ENTER to confirm the distance value. (See fig 27)
E.The calories will flash; then, press UP/DOWN to set the desired calories to burn. Press ENTER to confirm the calories value. (See fig 28).
F.Press START/ STOP to begin the workout. (See fig 29)
fig 26
fig 27
fig 28
fig 29
The computer will beep and enter into initial mode.(See fig 24)
