27
27
27
27
27
SYMPTOM
POSSIBLE REMEDY
• In general, IRQ4 belongs to COM1.
IRQ3 belongs to COM2. COM3 and
COM4 can be set to IRQ5-7, 10-12, or
11-15. It is best to put an interrupt-
driven device on COM1 or 2 (e.g., a
mouse).
• The IRQ settings in your software must
match the settings in Windows 95
Device Manager.
• Verify that the external device is
capable of those speeds.
• Make sure the board is set to high-
speed mode with the J12 jumper.
• The settings must be set correctly with
the J12 jumper and Windows 95 Device
Manager. These settings must not
conflict with any other hardware.
• The diagnostics program used must be
capable of testing 650 UARTS. Most
diagnostics programs can test only 450
and 550 UARTs.
I am not sure how to
I am not sure how to
I am not sure how to
I am not sure how to
I am not sure how to
set the IRQs.
set the IRQs.
set the IRQs.
set the IRQs.
set the IRQs.
No response when
No response when
No response when
No response when
No response when
working at speeds
working at speeds
working at speeds
working at speeds
working at speeds
exceeding 1
exceeding 1
exceeding 1
exceeding 1
exceeding 115Kbps.
15Kbps.
15Kbps.
15Kbps.
15Kbps.
The board will not
The board will not
The board will not
The board will not
The board will not
work in high-speed
work in high-speed
work in high-speed
work in high-speed
work in high-speed
mode.
mode.
mode.
mode.
mode.
Diagnostic programs
Diagnostic programs
Diagnostic programs
Diagnostic programs
Diagnostic programs
such as Checkit
such as Checkit
such as Checkit
such as Checkit
such as Checkit
report failures on
report failures on
report failures on
report failures on
report failures on
serial ports or wrong
serial ports or wrong
serial ports or wrong
serial ports or wrong
serial ports or wrong
UAR
UAR
UAR
UAR
UART speed.
T speed.
T speed.
T speed.
T speed.
Troubleshooting
9361.p65
1/28/99, 2:36 PM
27
Содержание Turbo 1x1
Страница 2: ...2 IO Turbo Series...
Страница 37: ...37 37 37 37 37...
Страница 38: ......
Страница 39: ...Part No 9361 10 97 2...