Boca Turbo 1x1, Руководство пользователя

Страница: 16 / 39

16
IO Turbo Series
2. Insert the board in the slot you have selected so the edge
connector on the bottom rear of the board mates with the
socket on the motherboard. Press down firmly on the
board. Use the removed screw to secure the board.
3. Replace any other adapter boards you may have removed
and re-attach any detached internal cables. If you have the
Turbo 2x2 version, continue with step 4. Otherwise, skip to
step 5.
4. Attach cable/bracket assembly to Serial B and Parallel B
connectors on the IO board, making sure that the red
stripe plugs into pin number “1” on the board connector.
After removing screw and, for the Turbo 2x2, adjacent rear
slot cover, secure the bracket using the screw you just
removed.
5. Replace the system cover taking care not to let it catch on
the disk drive or power cables. Once the cover is in place,
replace all the screws that you removed earlier. Reconnect
any previously removed external cables.
9361.p65 1/28/99, 2:36 PM 16