Boca Turbo 1x1, Руководство пользователя

Страница: 19 / 39

19 19
19 19
19
Section Three: Windows 95 Configuration
Before Y Before Y
Before Y Before Y Before You Begin:
ou Begin:
ou Begin: ou Begin: ou Begin: If your computer’s BIOS includes an option to
allow your operating system to configure Plug and Play devices,
you should select this option. This will Allow Windows 95 to
configure the IO Adapter. (Note: on some Award BIOS’s, this will
be a setting called “Resources Controlled By:”; select “Manual”.
Make sure the IO adapter has been installed in your
computer. To configure the IO Adapter in Windows 95, you
will need to know which version of Windows 95 you are
running. This is easily accomplished by right-clicking My
Computer and selecting Properties. Under “System:
Microsoft Windows 95” you will find the version. The
procedure which follows assumes Windows 95 Service
Release 2 (4.00.950B). For version 4.00.950, the install will be
slightly different. See footnote below.*
When you start up Windows 95, the “New Hardware “New Hardware
“New Hardware “New Hardware
“New Hardware
Found” Found”
Found” Found” Found” box is displayed. Next, the “Update Device Driver
“Update Device Driver
“Update Device Driver “Update Device Driver “Update Device Driver
W W W W Wizard” izard” izard” izard” izard” is displayed. Perform the following steps:
1. Insert the Boca driver diskette into your floppy drive and
click Next.
2. Windows 95 will detect the first device. Click Finish.
3. “New Hardware Found”
“New Hardware Found”
“New Hardware Found” “New Hardware Found” “New Hardware Found” is displayed repeatedly for each
device. Depending on the card you are installing, these
can include:
Driver Installation
9361.p65 1/28/99, 2:36 PM 19