21
21
21
21
21
Driver Installation
You may notice an exclamation point next to a listed device.
NOTE: Because of differences in Plug and Play systems, and the
resources available in your computer, you may find it necessary to
change the resources assigned to the Boca I/O adapter . Your
computer has 16 IRQs available, IRQ 0 through IRQ 15. Each of the
high speed serial ports on the Boca I/O adapter requires an IRQ and
the parallel ports will also each need one if you need to support ECP
mode. If you have other devices installed in your computer, you may
need to manually redistribute the resources among the devices. Below
are suggestions for changing the resources assigned to your new I/O
card.
•
•
•
•
•
If an exclamation point is displayed next to an ECP
If an exclamation point is displayed next to an ECP
If an exclamation point is displayed next to an ECP
If an exclamation point is displayed next to an ECP
If an exclamation point is displayed next to an ECP
Printer Port:
Printer Port:
Printer Port:
Printer Port:
Printer Port:
Go to Device Manager, select the Port you want to
configure, then choose Properties. Under the Resources
Tab, uncheck “Use Automatic Settings”
“Use Automatic Settings”
“Use Automatic Settings”
“Use Automatic Settings”
“Use Automatic Settings”
. Then, select
from the drop-down “Setting Based On:”
“Setting Based On:”
“Setting Based On:”
“Setting Based On:”
“Setting Based On:”
list.
The Basic Configurations with DMA listed will support a
port in ECP mode. The last configuration in the list will
configure the port without an IRQ. Selecting this choice
will free up an IRQ for use with another device, but the
parallel port will operate in SPP mode only. ECP and EPP
modes are not supported in this configuration.
9361.p65
1/28/99, 2:36 PM
21
Содержание Turbo 1x1
Страница 2: ...2 IO Turbo Series...
Страница 37: ...37 37 37 37 37...
Страница 38: ......
Страница 39: ...Part No 9361 10 97 2...