Boca Turbo 1x1, Руководство пользователя

Страница: 15 / 39

15 15
15 15
15
Section Two: Physical Installation
The IO Turbo Series adapter is simple and quick to install—
even for the novice computer user. Take a few moments to
read over the directions before you begin.
1. Remove your system cover,
remembering to power down
your system first. You may find it
necessary to remove other adapter
boards or detach cables. If so, make note of where
everything goes. Now, select an empty 16-bit expansion
slot. Choose either depending on convenience. Remove
the screw and the metal plate that covers the external
access to the slot you have selected.
Before inserting
the card, check
the jumper
marked J12
J12
J12 J12 J12 . Its
default setting is
software select.
Only change it if
you will be
running in high-speed mode at all times. Note that if set to high-
speed mode, make sure Communication Port Settings (bits per
second) are set to one-fourth of the actual speed desired (e.g.,
9600bps will yield 38400bps). Note:
Note: Note: Note: Note: a serial mouse will not work
on the serial ports when the board is set to high-speed mode.
Physical Installation
ç
Normal
High-
Speed
or
Software
select
9361.p65 1/28/99, 2:36 PM 15