background image

•  The BOB Duallie Infant Car Seat Adapter 

is designed for use with double seat BOB 
Strollers and compatible Infant Car Seats. This 
product is not a universal adapter. Do not use 
with car seats and stroller models other than 
those specifi cally listed in the Stroller and Car 
Seat Compatibility charts listed on page 1. 

•   Children should not be placed directly in 

the BOB Stroller seat with the Duallie ICSA 
installed, unless tray is installed directly in 
front of child for safety and protection.

•  The Duallie ICSA Restraint Belt can interfere 

with the accessibility and proper function of 
the right side safety harness system and the 
Accessory Bar of the Duallie ICSA can interfere 
with accessibility to the right seat. Duallie 
ICSA restraint belt and accessory bar must be 
removed from the BOB Stroller and Right Tray 
must be installed prior to placing child directly 
in right seat. Failure to do so may result in 
serious injury or death.

•   Read and understand all owner’s manuals and 

warnings for all BOB products used with the 
Duallie ICSA before use.

•   Read and understand infant car seat owner’s 

manual before use.

•   Always use seat harness of Infant Car Seat to 

avoid children falling out of stroller.

•   Maximum capacity 17.5lb (weight of infant 

including clothing). Exceeding capacity may 
cause stroller to become unstable.

•   Follow assembly instructions. Failure to 

properly install this accessory product 
may result in accidents, severe injury or 
death. If you are not sure you can install this 
accessory, contact your BOB retailer and 
arrange for them to perform the installation.

•   Never leave children unattended in the 

stroller/infant car seat.

•   Always secure the infant car seat with the 

restraint belt when the car seat is placed in 
the stroller. Failure to do so may result in 
serious injury or death.

•   Always keep your Infant Car Seat handle 

in the vertical and locked position while in 
stroller, as extra protection for your child.

•   Stroller may become unstable if parcel bags 

are incorrectly attached or if bags other than 
those recommended by BOB Trailers, Inc. are 
used.

•   Do not run or jog when using the Duallie 

ICSA with car seat installed. Doing so may 
result in serious injury or death.

•   Do not use off -road or on uneven terrain 

when using the Duallie ICSA with car seat 
installed. Doing so may cause stroller to 
become unstable and result in accident, 
serious injury or death.

•   Children develop at diff erent rates. Consult 

with your pediatrician regarding the 
suitability of the stroller use with your child. 

Duallie Infant Car Seat Adapter Warnings 

BOB IS NOT RESPONSIBLE FOR INJURY, DAMAGE OR FAILURE THAT RESULTS 

FROM OWNERS FAULTY ASSEMBLY OR MAINTENANCE AFTER SHIPPING.

OMA18B

P12

•  Loctite 262 is a potentially hazardous chemical. Do not allow contact with skin or 

eyes. Do not ingest. Use in well ventilated area. Keep out of reach of children and 
dispose of vial properly. Other safety warnings for Loctite 262 can be found at 
www.loctite.com

Содержание Duallie Infant Car Seat














Отзывы: