Extend canopy to expose
lower fabric screw.
Remove screw
with Phillips
screwdriver,
exposing fabric
grommet and
rivet nut.
Repeat on other side.
Arm Post
Red pull ring
should face out.
ATTACH RESTRAINT BELT AND ARMS
LOCATE FABRIC SCREW
REMOVE FABRIC SCREW
Insert
sharp screw
through end of
arm
,
fabric grommet and into rivet nut.
Sharp screw
should tighten fl ush
against
arm
.
SECURE ARM
Note:
If screw does
not turn easily,
unscrew and
start again.
POSITION ARM (TRAY SIDE)
POSITION ASSEMBLY
ASSEMBLE RESTRAINT BELT M AND ARM
Slide
restraint belt M
grommet over
arm
post
.
Position
arm
between
canopy and frame.
Align
arm
hole
over
fabric grommet
and rivet nut.
Position
arm
between
canopy and frame.
Align
arm
hole
over fabric grommet
and rivet nut.
OMA18B
P4
