63
TIP
: Attach screws to
accessory bar
for future use.
CAUTION
: Ends of
accessory bar
are sharp!
REMOVE ACCESSORY BAR
RIGHT TRAY INSTALLATION
REMOVE LONG SCREWS
Using a Phillips screwdriver
remove both screws.
Using a Phillips
screwdriver, remove
3 long screws from
right tray
.
ATTACH LONG SCREWS
Insert
long screw
through each hole in
right tray
,
main bar
and into nut on underside of
right tray
.
Tighten fi rmly with Phillips screwdriver.
POSITION TRAY
Position
right tray
on
main
bar
, lining up holes.
Using a Phillips screwdriver and an 8 mm
socket wrench, remove
short screw
and
nut
.
REMOVE SHORT SCREW AND NUT
Reach under
left tray
and
press
nut
into hole.
Reach under
right tray
and insert
short screw
through
right tray,
left tray
and into
nut
.
ATTACH SHORT SCREW AND NUT
Tighten fi rmly with
Phillips screwdriver.
Children should not be
placed directly in the
BOB Stroller seat with the
Duallie ICSA installed,
unless tray is installed
directly in front of child for
safety and protection.
Warning
OMA18B
P10
