PULL
PUSH
Fasten
restraint belt
over top
of infant car seat as shown.
FASTEN RESTRAINT
BELT
Britax
®
Move car seat
handle into upright
carrying position.
RAISE HANDLE
INSTALL INFANT CAR SEAT
ENGAGE CAR SEAT
POSITION CANOPY
Position both canopies
against handle bar.
LOWER SEAT BACK
UNBUCKLE
RESTRAINT BELT
Unbuckle
restraint
belt
. Place ends
outside seat.
PREPARE STROLLER FOR INFANT CAR SEAT INSTALLATION
SET PARKING
BRAKE
Britax
®
Go To
Slide grooves on underside
of car seat onto ICSA
accessory bar.
POSITION
CAR SEAT
SET CAR SEAT
Gently pull canopy
stays while pushing
car seat handle.
Peg Pérego
®
Go To
Graco
®
Go To
When installing car seat in the Duallie ICSA for the fi rst time,
test fi t with the car seat unoccupied to ensure you understand
the process. Installing occupied Infant Car Seat on Duallie ICSA
for fi rst time may result in accident, serious injury or death.
Place car seat
“rear facing” onto
ICSA
accessory
bar
, in a straight
downward
motion.
Warning
See the “Parking Brake”
section of your stroller
owner’s manual.
Lower seat back 7” to 8”.
See the “Reclining Seat” section
of your stroller owner’s manual.
Car seat should
“set” down onto
seat of stroller.
OMA18B
P6
