Fasten restraint belt over top
of infant car seat as shown.
FASTEN RESTRAINT BELT
Move car seat handle
into upright carrying
position.
POSITION HANDLE
Place car seat
“rear facing”
onto ICSA
accessory bar
,
in a straight
downward
motion.
POSITION CAR SEAT
ENGAGE CAR SEAT
RAISE SEAT BACK
Peg Pérego
®
Slide grooves on
underside of car seat onto
ICSA accessory bar.
TO REMOVE Britax®
Go To
PULL
PUSH
SET CAR SEAT
Gently pull canopy stays while
pushing car seat handle.
Car seat should “set” down onto
seat of stroller.
Pull on red ring to tighten.
TIGHTEN RESTRAINT BELT
Be sure restraint belt tension
is not constricting child as it
may cause serious injury.
DOUBLE CHECK CAR SEAT IS
SECURELY ATTACHED
Warning
Pull car seat upward without
removing restraint belt.
You should not be able to
remove car seat without
unfastening restraint belt.
Warning
Failure to securely attach car seat
may result in serious injury or death.
See the “Reclining Seat”
section of your stroller
owner’s manual.
OMA18B
P7
