5
EN
Battery Charging
Celectra
™ 2-Cell 7.4V DC Li-Po Charger (EFLUC1007)
E-fl ite
®
2S 7.4 V 200mAh 30C Li-Po Battery Pack
(EFLB2002S30)
The
Blade
mCP X BL 2S Li-Po battery features an
EFL2 connector that allows you to safely charge your
battery pack when used with the included Li-Po charger
and charge adapter. The included fl ight battery is safe to
charge up to 3C (0.6 Amp).
NOTICE:
Use only Horizon Hobby approved battery packs
and chargers compatible with this product.
1. Connect the power supply to an appropriate power
source.
2. Connect the battery charger to the power supply.
3. Align the tab on both the battery and charger connectors. Connect the battery to the charger lead.
4. Press the Start/Stop button on the charger.
5. Battery charging is complete when the charger LED is solid green.
CAUTION:
NEVER attempt to power the charger from an AC outlet without the use of a proper AC to DC
adapter/power supply.
CAUTION:
DO NOT connect charged or discharged Li-Po batteries if the power supply is connected to the
charger but the power supply is not connected to a power source. Doing so will discharge and possibly
damage the batteries.
9
First Flight Preparation
1. Remove and inspect contents
2. Charge the fl ight battery
3. Program your computer transmitter
4. Install the fl ight battery in the helicopter
(once it has been fully charged)
9
5. Bind your DSM
®
compatible transmitter to the
helicopter.
6. Test the controls
7. Familiarize yourself with the controls
8. Find a suitable area for fl ying
