BMW X3 M, Руководство пользователя

Страница: 343 / 396

1. Hold the vehicle jack with one hand, arrow 1,
and grasp the vehicle jack crank or lever with
your other hand, arrow 2.
2. Insert the vehicle jack into the rectangular re‐
cess of the jacking point closest to the wheel
to be changed.
3. Extend the vehicle jack by turning the vehicle
jack crank or lever clockwise.
4. Take your hand away from the vehicle jack as
soon as the vehicle jack is under load and
continue turning the vehicle jack crank or
lever with one hand.
5. Make sure that the vehicle jack foot stands
vertically and at a right angle beneath the
jacking point.
6. Make sure that the vehicle jack foot stands
vertically and perpendicularly beneath the
jacking point after extending the vehicle jack.
7. Crank the vehicle up, until the vehicle jack is
with the entire surface on the ground and the
relevant wheel is maximum 1.2 inches/3 cm
above ground.
Mounting a wheel
Warning
Unsuitable wheel studs, such as single-section
wheel studs, may loosen or come off. The
wheel may come loose during driving. There is
a risk of accident. Use only two-section wheel
studs that have been categorized as suitable
for the respective wheel type by the manufac‐
turer of the vehicle.
Mount one emergency wheel only, as required.
1. Unscrew the lug bolts.
2. Remove the wheel.
Seite 343
Wheels and tires
MOBILITY
343
Online Edition for Part no. 01405A37822 - VI/21