BMW X3 M, Руководство пользователя

Страница: 121 / 396

▷ Only use accessories that have been de‐
termined to be safe for attachment to a
head restraint.
▷ Do not use any accessories, for instance
pillows, while driving.
Folding down the head restraints
To improve the view to the rear, the head re‐
straints can be folded back. Only fold the head
restraint back if no one will be sitting in the corre‐
sponding seat.
▷ To the rear: press the button, arrow 1, and
fold the head restraint backward.
▷ Forward: fold the head restraint toward the
front as far as it will go. Make sure that the
head restraint engages correctly.
Adjusting the height
The height of the outer head restraints can be
adjusted.
▷ To lower: press the button, arrow 1, and push
the head restraint down.
▷ To raise: push the head restraint up.
After setting the height, make sure that the head
restraint engages correctly.
Removing
Only remove the head restraint if no one will be
sitting in the seat in question.
1. Fold down the rear seat backrest in question.
Enlarging the cargo area, refer to page
305 .
2. Raise the head restraint up against the resist‐
ance.
3. Press the button, arrow 1, and pull the head
restraint out completely.
Installing
Proceed in the reverse order to install the head
restraint.
After the installation, make sure that the head re‐
straint engages correctly.
Exterior mirrors
General information
The mirror on the front passenger side is more
curved than the driver's side mirror.
The mirror setting is stored for the driver profile
currently in use. When a driver profile is selected,
the stored position is called up automatically.
The current exterior mirror position can be stored
using the memory function.
Seite 121
Seats, mirrors and steering wheel
CONTROLS
121
Online Edition for Part no. 01405A37822 - VI/21