BMW X3 M, Руководство пользователя

Страница: 354 / 396

Coolant level
General information
Depending on the motorization, there are up to
two coolant reservoirs in the engine compart‐
ment. Check and add the coolant levels on a reg‐
ular basis.
The coolant level is indicated using minimum
and maximum markings in the filler neck of the
coolant reservoir.
Additional information:
For an overview, refer to page
346 .
Checking the coolant level on the
side markings
1. Let the engine cool down.
2. Opening the hood.
Opening, refer to page
347 .
3. The coolant level is correct if it lies between
the minimum and maximum marks on the
coolant reservoir.
Icon Meaning
Maximum.
Minimum.
Checking the coolant level in the
filler neck
1. Let the engine cool down.
2. Opening the hood.
Opening, refer to page
347 .
3. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres‐
sure to dissipate, then open it.
4. Open the coolant reservoir lid.
5. The coolant level is correct if it lies between
the minimum and maximum marks in the filler
neck.
6. Close the lid.
Adding coolant
1. Let the engine cool down.
2. Opening the hood.
Opening, refer to page
347 .
3. Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess pres‐
sure to dissipate, then open it.
4. Open the coolant reservoir lid.
5. If the coolant is low, slowly add coolant up to
the specified level; do not overfill.
6. Close the lid.
7. Have the cause of the coolant loss eliminated
as soon as possible.
Disposal
Comply with the relevant environmental
protection regulations when disposing of
coolant and coolant additives.
Washer fluid
General information
All windshield washer jets are supplied from one
tank.
Use a mixture of tap water and windshield
washer concentrate. If desired, a windshield
Seite 354
MOBILITY
Operating materials
354
Online Edition for Part no. 01405A37822 - VI/21