BMW X3 M, Руководство пользователя

Страница: 89 / 396

Hiding the display on the display manually: press
the button on the left side of the display key.
To show the display:
1. Press the button on the left side of the dis‐
play key.
2. Then, swipe with your finger from bottom to
top to unlock the screen lock.
To turn off the display to increase the usable bat‐
tery life:
1. If necessary, cancel the screen lock.
2. Press and hold the button on the left side of
the display key for longer than 4 seconds.
3. "OK"
To turn the display on:
Press the button on the left side of the display
key.
Operating concept
The following information shows how to access
the information and functions using the main
menus.
Main menu Information/Function
"Security
information" /
Door status.
Alarm system status.
After alarm triggering: date,
time, and reason for trig‐
gering the alarm.
Window status.
Glass sunroof status.
"Vehicle
information" Maintenance indicators of
Condition Based Service
CBS.
Status of the roadside
parking lights.
Main menu Information/Function
"Mobility info" Range with available fuel.
"Preconditioning
setting" With parked-car heating:
operate parked-car heat‐
ing.
Without parked-car heat‐
ing: operate pre-ventilation.
Stationary climate control
through Remote Engine
Start.
Display key battery
General information
Follow the following information:
▷ If the charge state of the display key battery
declines, the display is switched off automati‐
cally. The battery must be recharged so that
the display can be switched back on. The op‐
erability of the standard buttons is retained
until the battery is completely discharged.
▷ Charge the battery for at least three hours
before using the display key for the first time
or if the key has not been used for an ex‐
tended period.
▷ The display key can be used while it is being
charged via the USB port. If the battery is fully
discharged, it may take some time before the
display key can be used again.
▷ Due to the large number of USB chargers
available on the market, it cannot be guaran‐
teed that every charger will function properly.
The charging time depends on the charger
used.
▷ Charging via the USB port may heat up the
charger and the display key.
Charging in the wireless charging tray may
heat up the tray and the display key.
At higher temperatures, the charge current
through the display key may be reduced, and
Seite 89
Opening and closing
CONTROLS
89
Online Edition for Part no. 01405A37822 - VI/21