BMW R 1200 GS 2005, Руководство пользователя для мотоциклиста

Страница: 102 / 157

or their threads can suffer
damage.
Always have the security of
the fasteners checked by a
specialist workshop, prefer-
ably an authorised BMW Mo-
torrad dealer.
Roll the rear wheel into po-
sition at the rear-wheel ad-
apter.
Seat the rear wheel on the
rear-wheel adapter.
The wheel studs for the
cross-spoked wheel
(optional extra) and the cast
aluminium wheel differ in
length. Mixing up sets of
studs or using the wrong
studs would mean that the
rear wheel would not be
correctly secured and this,
in turn, could result in an
accident.
Use only wheel studs with the
same, approved length code.
Do not oil or grease wheel
studs.
Install studs 1 and tighten to
the specified torque in diag-
onally opposite sequence.
Rear wheel to wheel carrier
Tightening sequence: In di-
agonally opposite sequence
60 Nm
With OE Cross-spoked
wheels:
Tightening sequence: In di-
agonally opposite sequence
60 Nm
Bulbs
General instructions
A warning appears in the mul-
tifunction display if a bulb is
defective. If the brake light
or rear light fails, the warn-
ing is accompanied by the
General warning light light-
ing up yellow. If the rear light
fails the second filament of
the brake light shines at re-
duced brightness to double
as a rear light. Even though
you have this substitute rear
light, the indicators in the dis-
play tell you that a bulb defect
has occurred.
A defective bulb places
your safety at risk be-
cause it is easier for other
users to oversee you and
your motorcycle.
Replace defective bulbs as
soon as possible; always
7
100
z Maintenance